Get Quote
Contact us now to receive a detailed quotation.
Atomic Absorption Spectrophotometer LMAAS-A110 operates within wavelength range of 190 to 900 nm. Designed with both flame and graphite furnace atomization, it accommodates diverse analytical needs. Features double-beam optical system for stable signal detection. Maintains consistent performance by minimizing static and dynamic baseline drift. Our Spectrophotometer with automated software ensures full control with advanced functionality.
Specifications
| Optical Type | Double beam |
| Atomizer | Flame and Graphite furnace |
| Monochromator | Czerny-Turner type, focal length at 350mm |
| Wavelength Range | 190 to 900 nm |
| Wavelength Accuracy | ±0.15nm |
| Wavelength Repeatability | ±0.05nm |
| Grating | Holographic diffraction grating with 1800 lines/mm |
| Slits | 0.1, 0.2, 0.4, 0.7, 1.4, 2.0nm |
| Lamp Holder | Automated 8 lamp turret |
| Detector | Wide range UV-sensitive photomultiplier tube |
| Reading Mode | Transmittance(T), Absorbance(A), Concentration(C) |
| Photometric Range | 0 to 125%, -0.1 to 3.00A |
| Static Baseline Drift (Cu) | Less than 0.002A/30 min |
| Dynamic Baseline Drift | Less than 0.004A/15min |
| Background Correction | D2 and self-absorption |
| Characteristic Concentration | Cu less than 0.035µg/ml |
| Characteristic Mass | Cd less than 0.8pg, Cu less than 20pg |
| Detection Limit | Flame Analysis: Cu less than 0.004µg/ml, |
| Repeatability (Cu) | Flame Analysis: RSD less than 0.5%, |
| Acetylene Flow Control | Auto 12-level |
| Air Flow Control | Auto 4-level |
| Burner Head | 100mm Titanium alloy burner |
| Ambient Temperature | 3000°C |
| Ramp And Holding Time | 1 to 255s |
| Heating Rate | Maximum linear heating rate 2000°C/s |
| Heating Method | Light-controlled heating, Time-controlled heating, General heating |
| Gas Flow Rate Inside Tube | 1L/min |
| Gas Flow Rate Outside Tube | 0, 50, 200, 250ml/min |
| Safety Protection | Water flow sensor, Argon pressure sensor, Furnace body temperature sensor, Graphite tube installation self-inspection, Flame sensor, Gas leak sensor, Gas pressure sensor |
| Software | RGWIN AAS software package |
| Analytical Method | Flame AA, Flame AE, Hydride generation |
| Concentration Calculation Method | Standard curve, Standard Addition, Interpolation |
| Repeated Measurement Times | 1-30 times, Average, SD and RSD |
| Qa/Qc Function | Correlation coefficient, SD & RSD |
| Communication Port | Standard RS-232 |
| Working Environment | Temperature 10-35 °C, Humidity less than 85% |
| Power Supply | 110/220V, 50/60Hz |
| Dimension(W×D×H) | 850×650×550mm |
| Weight | 100KG |
Pricing
| Product | Price | Unit | Action |
|---|---|---|---|
| Atomic Absorption Spectrophotometer LMAAS-A110 | $ 45137.5 | Each of 1 |
Features
High-performance glass nebulizer
Durable premix chamber
Report printing
360° Rotating 8-lamp turret
Deuterium and self-absorption background correction
Standard Accessories
| Accessory | Unit | Quantity |
| Main unit | Each | 1 |
| Power cable | Each | 1 |
| Data cable | Each | 1 |
| Screw driver | Each | 1 |
| Cu Hollow cathode lamp | Each | 1 |
| Cd Hollow cathode lamp | Each | 1 |
| Air compressor | Each | 1 |
| 6mm orange acetylene tube (10m) | Each | 1 |
| 6mm transparent air tube (10m) | Each | 1 |
| USB (manual and software) | Each | 1 |
| Drain tube (2m) | Each | 1 |
| Acetylene pressure-reducing valve connector | Each | 1 |
| 5A fuse | Each | 3 |
| Argon pressure reducing valve connector | Each | 1 |
| Graphite tube | Each | 5 |
| High power socket | Each | 1 |
| 6×4mm transparent argon tube (10m) | Each | 1 |
| 5 to 50µl Pipette | Each | 1 |
| 200µl Pipette tip (1000pc/bag) | Pack | 1 |
| 6×10mm cooling water tube (6m) | Each | 1 |
| Graphite furnace camera connection cable | Each | 1 |
| Ignition filament | Each | 5 |
Optional Accessories
Model No | Accessory | Unit | Quantity |
LMAAS-A110-H1 | Hybrid Generator | Each | 1 |
LMAAS-A110-W1 | Circulation Cooling Water System | Each | 1 |
LMAAS-A110-Q1 | Quiet Air Compressor | Each | 1 |
LMAAS-A110-B1 | 50mm Nitrous Oxide Burner | Each | 1 |
LMAAS-A110-G1 | Graphite Tube | Each | 1 |
LMAAS-A110-N1 | Glass Nebulizer | Each | 1 |
LMAAS-A110-A1 | Auto Sampler | Each | 1 |
LMAAS-A110-A2 | Auto Sampler | Each | 1 |
LMAAS-A110-M1 | N2O Module | Each | 1 |
LMAAS-A110-D1 | Deuterium Lamp | Each | 1 |
LMAAS-A110-C1 | Camera for Graphite Tube | Each | 1 |
LMAAS-A110-L1 | Hollow Cathode Lamp (Al, Ba, Bi, Ca, Co, Cr, Cd, Cu, Fe, Hg, K, Li, Mg, Mn, Mo, Na, Ni, Pb, Sb, Sn, Sr. Ti, Zr) | Each | 1 |
LMAAS-A110-L2 | Hollow Cathode Lamp (Ag, As, Se, Si, Te, V, W) | Each | 1 |
LMAAS-A110-L3 | Hollow Cathode Lamp (B, P, Ge, Zr) | Each | 1 |
LMAAS-A110-L4 | Hollow Cathode Lamp (Be) | Each | 1 |
LMAAS-A110-L5 | Hollow Cathode Lamp (Au) | Each | 1 |
LMAAS-A110-L6 | Hollow Cathode Lamp (Rb) | Each | 1 |
LMAAS-A110-L7 | Hollow Cathode Lamp (Cs) | Each | 1 |
Applications
Atomic Absorption Spectrophotometer LMAAS-A110 is employed in material analysis, mining, geology, biological research, metallurgy, petrochemistry, food, and pharmacy to measure the concentration of specific metal elements.
Similar Products
$ 38012.5 / Each of 1
$ 19862.5 / Each of 1
$ 26600 / Pack of 1
$ 18300 / Each of 1
$ 12450 / Each of 1
$ 23000 / Each of 1
$ 28550 / Each of 1
$ 28750 / Each of 1
$ 22962.5 / Each of 1
$ 26137.5 / Each of 1
Frequently Asked Questions
1 What is an Atomic Absorption Spectrophotometer?
An Atomic Absorption Spectrophotometer is an apparatus designed to measure the concentration of elements by detecting the absorption of optical radiation (light) by free atoms in the gaseous state.
2 How does Atomic Absorption Spectrophotometer work?
It works by measuring the absorption of light by vaporized atoms to determine the concentration of specific elements.
3 What elements can be detected using Atomic Absorption Spectrophotometer?
It can detect metals such as lead, copper, zinc, iron, calcium, and magnesium.
4 How is Atomic Absorption Spectrophotometer used in environmental analysis?
It is used in environmental analysis to detect trace metals like lead, mercury, and cadmium in water, soil, and air samples.
5 What is the role of Atomic Absorption Spectrophotometer in food safety testing?
It plays a vital role in food safety testing by measuring toxic metal residues such as arsenic and lead in food products.
6 Can Atomic Absorption Spectrophotometer be used in pharmaceutical industry?
In pharmaceutical industry, it is used to ensure raw materials and finished products meet safety standards by analyzing metal content.
7 Can Atomic Absorption Spectrophotometer be used in mining applications?
It is used in mining to analyze ore samples for valuable metals like gold, silver, and copper.
8 How is Atomic Absorption Spectrophotometer used in agriculture?
It is used in agriculture to monitor nutrient levels and detect toxic metals in soil, water, and fertilizers.
9 Can Atomic Absorption Spectrophotometer be used in forensic science?
In forensic science, it is used to detect trace metals in evidence such as gunshot residues or poisoned tissues.
10 How does Atomic Absorption Spectrophotometer assist in quality control in manufacturing?
It assists in quality control by verifying metal content in materials used in electronics, automotive, and metal finishing industries.