Close

Enquiry Form

Close

Ask An Expert

Dry Bath Incubator LMDR-B105

Dry Bath Incubator LMDR-B105

Labmate Dry Bath Incubator LMDR-B105 is a replacement of the traditional dry bath incubators. It is a microprocessor controlled device with a meticulousness of temperature control and sample preparation parallelism. It has an accurate temperature control with high stability, low power consumption and a large LCD display.

Get Quote
Temp. Control Range RT+5℃ ~ 120℃
Heating time ≤ 30 min(from 20 ℃ to 150 ℃)
Temperature Control accuracy@100°C ≤ ±0.5℃
Block temp difference@40℃ 0.3℃
Block temperature Uniformity ≤ ±0.5℃
Display Accuracy 0.1℃
Timing Range 99h59min
Maximum Temperature 120℃
Maximum power 600W
Power Supply 100-230V 50/60Hz
Dimension 360x220x95mm

point.png Large LCD display

point.png Simultaneous display of set temperature and time diminishing

point.png In built temperature calibration

point.png In built over temperature protection

point.png Programmed diagnostics monitoring

point.png Safe and reliable use

point.png Uniform heating

point.png Temperature control with high stability

point.png Lower power consumption

Model No. Specification Maximum Temperature
LMDR-BO18 96x0.2ml PCR plate 100°C
LMDR-BO19 54x0.5ml 100°C
LMDR-BO20 35x1.5ml 100°C
LMDR-BO21 35x2.0ml 100°C
LMDR-BO22 20x0.5ml+15x1.5ml 100°C
LMDR-BO23 24xdiameter≤φ12mm 100°C
tubes
LMDR-BO24 32x0.2ml+25x1.5ml 100°C
LMDR-BO25 32x0.2ml+10x0.5ml 100°C
+15x1.5ml
LMDR-BO26 103x67x30 100°C
(Water Bath Block)
LMDR-BO27 96x0.2ml plate 100°C
(flat bottom)

Get Quote for
Dry Bath Incubator LMDR-B105

Dry Bath Incubator

Labmate Dry Bath Incubators include a range of heating and cooling incubators. The device comes with a microprocessor controller providing high precision of temperature control. The instrument has an advantage over conventional water baths as it performs simultaneous operations at a time making it ideal to use in pharmaceutical, chemical, food industry as well as environment sector and quality inspection.

Anaerobic Incubator

Anaerobic Incubator is expertly designed to establish and sustain an oxygen-free environment, which is essential for growing and researching anaerobic microorganisms. Its microcomputer control system allows precise temperature control within the chamber, ranging from room temperature +3 to 60℃. This equipment is customized to guarantee a reliably anaerobic setting, placing equal emphasis on experiment integrity and operator safety.

Biochemical Incubator

The Labmate Artificial Climate Incubator represents a cutting-edge, eco-friendly solution ideally suited for an array of scientific endeavors, including cell culturing experiments, plant cultivation, animal husbandry, and diverse environmental research. This versatile incubator boasts an adjustable illumination spectrum and offers a wide range of temperature and humidity settings, meticulously replicating precise climatic conditions conducive to optimal growth. Distinguished by its high-precision temperature control system, this incubator guarantees the uninterrupted maintenance of desired environmental parameters critical for successful experimentation. Its robust construction features non-corrosive stainless steel, guaranteeing long-term durability and reliability, making it a dependable asset for researchers and scientists seeking consistent, controlled environments for their studies.

CO2 Incubator

Labmate CO2 Incubator is specially equipped with air-jacketed and water-jacket insulation technology for consistent environment. It comes with Infrared sensor assisted CO2 controller system which gives user the precise control over CO2 level setting and calibration. The micro-computer temperature controller is well-furnished with over-temperature and temperature timing alarm. It is specifically design with high efficiency air filter for uniform air flow suitable for tissue culture application; development of immunological and stem cells experiments.

Constant Temperature and Humidity Incubator

Labmate Constant Temperature and Humidity Incubator is a stainless steel chamber formulated to produce exact simulation of varying climatic conditions. The instrument comes with a user-friendly digital LCD interface for easy operation of parameters. It is equipped with micro-computer control system which ensures synchronized regulation of temperature and humidity. The temperature limiting / over temperature alarm system ascertains the equipment safety. It is highly suitable for checking stability and shelf life of the products in pharmaceutical, electronic, automobile and packaging industry and so on.

Constant Temperature Incubator

Labmate Constant Temperature Incubator is an advanced equipment with electro-thermal heating system which guarantees speedy heating. The design offers inner glass door for uninterrupted observation while maintaining a constant internal temperature. The fully sealed magnetic door ensure good insulation. Mirror stainless steel built gives the incubator excellent corrosion resistance. It is essentially suitable for biological or chemical reactions in universities or research laboratory; or artificial hatching of eggs.

Cooling Incubator

Labmate offers a wide range of cooling incubators with different temperature requirements, making them ideal for preserving culture mediums, serums, medicines, microorganism cultivation, and environmental testing applications, among others. Our cooling incubators encompass a temperature range spanning from -10°C to -75°C, providing options with capacities ranging from 175 liters to 1000 liters, and a time range of 0 to 99 hours and 59 minutes. These incubators feature a double-door design for improved functionality, an auxiliary thermostat to enhance temperature control, and a convenient LCD screen for user-friendly operation. Additionally, the external printer facilitates real-time data recording, making Labmate cooling incubators a comprehensive and reliable solution for various scientific and laboratory needs.

Electric Heating Incubator

Labmate Electric Heating Incubator is designed for precision heating and temperature control. These are microprocessor-controlled units and maintain uniform heat distribution with high-quality insulation. Our incubator features variable capacities with adjustable shelving to accommodate a wide variety of samples. They are integrated with a user-friendly interface for monitoring various parameters. These incubator supports a wide range of temperature ranges and ensure optimal results.

Illumination Incubator

Labmate Illumination Incubator is a special-purpose thermostat and humidistat equipment which simulate natural light condition. With high performance temperature control system, an uninterrupted climatic condition can be sustained. The full-spectrum light source ensures accurate light support for growth requirement. The instrument is equipped with security sensors making it safe and stable. It is highly applicable to plant growth experiments, seed germination, breeding experiments or microbial cultivation.

Microbiological Incubator

Labmate Microbiological Incubator is an environment-friendly equipment designed to maintain a steady condition for the growth of biological sample. With high precision micro-computer control system, a uniform temperature setting can be maintained. The large hollow design of glass window and lighting system enables real time observation. Unique stainless steel circular duct ensures uniform air circulation. It is an ideal equipment for testing microbiological experiments, pharmaceutical inspection, tissue culture experiment, or BOD estimation for water testing.

Microplate Shaker Incubator

Our Microplate Shaker Incubator is designed to deliver precise temperature control and maintain consistent experimental conditions. These incubators offer variable shaking speeds promoting the homogeneity and integrity of the samples. Our incubators feature uniform heating across microplates ensuring reliable results. They are compatible with standard microplate formats and seamlessly integrate into existing laboratory workflows.

Mini Dry Bath Incubator

Labmate Mini Dry Bath Incubators include a range of heating and cooling incubators. The device comes with a microprocessor controller providing high precision of temperature control. The instrument has an advantage over conventional water baths as it performs simultaneous operations at a time making it ideal to use in pharmaceutical, chemical, food industry as well as environment sector and quality inspection.

Oven Incubator

Labmate Oven Incubator are multifaceted device for maintaining controlled environmental conditions. They are equipped with microprocessor temperature air controller for precise regulation of temperature. They are made of stainless steel or another corrosion-resistant material for durability and easy cleaning. They consist of large viewing window for convenient observation of the experiment . Our Oven Incubator are designed with temperature alarms signals to know about device status.

Platelet Agitator Incubator

Labmate Platelet Agitator Incubator is well-equipped with advanced agitator to preserve each platelet units during storage. It is furnished with reliable temperature control system with agitator mechanism ensuring consistent condition with effortless agitation. A forced air convection ensures homogenous air circulation through perforated agitator trays. It comes with a high grade alarm system to protect the instrument. The equipment can be used by blood bank units, medical industry, hospitals, pharmaceutical industry and so on.

Platelet Incubator

Labmate Platelet Incubator are engineering to maintain stable temperature environment for optimal storage. They feature forced air circulation systems to evenly distribute and maintain uniform temperature throughout. Their Microprocessors enable precise temperature control for reliability and integrity of stored platelets. They prevent temperature fluctuations ensuring optimal conditions to preserve critical medical resources safely. Our Platelet Incubator are applicable in blood banks, hospitals, research laboratories, transfusion centres, and more.

Shaking Incubator

Labmate Shaking Incubator is an innovative instrument which provides a controlled environment for continuous growth condition. It provides stable shaking movement for long-term operation with an adjustable speed range. The shaking platform comes with various sizes which provides different volume capacity. It is well-equipped with accurate temperature control system and speed regulation for persistent operation. The independent alarm system ensures equipment safety. It widely applicable in research industry for microbiological experiment, fermentation industry, pharmaceutical industry and so on.

Triple Gas Incubator

Labmate Triple Gas Incubator are designed to create and maintain controlled environments for biological cultures. They maintains precise temperature range from +5°C to 60°C . They are equipped with air jacket to ensure uniform temperature stability. They consist of 3 adjustable shelves and a USB port. Our Triple Gas Incubator offers HEPA filters and visual alarms for over-temperature.

Water Jacketed Incubator

Labmate Water Jacketed Incubator is an advanced equipment designed with water-jacket heating technology. It has ability to sustain consistent temperature even after power-off. The Micro-computer PID control system provides automatic alarm system for temperature and water level. It comes with LCD screen digital interface for easy operation of parameters. The chamber is made of stainless steel posing corrosion resistance. It is widely applicable in cell culturing experiments, or medical industry, fermentation industry, and so on.