Labmate Dry Bath Incubator LMDR-B101 is a replacement of the traditional dry bath incubators. It is a microprocessor controlled device with a meticulousness of temperature control and sample preparation parallelism. It has an accurate temperature control with high stability, low power consumption and a large LCD display.
Get Quote| Temp. Control Range | -10℃-100℃ |
| Heating time | ≤ 15 min(from 20 ℃ to 150 ℃) |
| Temperature Control accuracy@100°C | ≤ ±0.5℃ |
| Block temp difference@40℃ | 0.3℃ |
| Block temperature Uniformity | ≤±0.3℃ |
| Display Accuracy | 0.1℃ |
| Timing Range | 99h59min |
| Maximum Temperature | 100℃ |
| Cooling Temperature | ≤30min (from RT to RT-30℃) (detecting at RT26℃) |
| Maximum power | 150W |
| Power Supply | 100-230V 50/60Hz |
| Net Weight | 2.2 kg |
| Dimension | 270x190x170 mm |
Large LCD display
Simultaneous display of set temperature and time diminishing
In built temperature calibration
In built over temperature protection
Programmed diagnostics monitoring
Safe and reliable use
Uniform heating
Temperature control with high stability
Lower power consumption
| Model No. | Specification | Maximum Temperature |
| LMDR-BO18 | 96x0.2ml PCR plate | 100°C |
| LMDR-BO19 | 54x0.5ml | 100°C |
| LMDR-BO20 | 35x1.5ml | 100°C |
| LMDR-BO21 | 35x2.0ml | 100°C |
| LMDR-BO22 | 20x0.5ml+15x1.5ml | 100°C |
| LMDR-BO23 | 24xdiameter≤φ12mm | 100°C |
| tubes | ||
| LMDR-BO24 | 32x0.2ml+25x1.5ml | 100°C |
| LMDR-BO25 | 32x0.2ml+10x0.5ml | 100°C |
| +15x1.5ml | ||
| LMDR-BO26 | 103x67x30 | 100°C |
| (Water Bath Block) | ||
| LMDR-BO27 | 96x0.2ml plate | 100°C |
| (flat bottom) |
Get Quote for
Dry Bath Incubator LMDR-B101
Labmate Dry Bath Incubators include a range of heating and cooling incubators. The device comes with a microprocessor controller providing high precision of temperature control. The instrument has an advantage over conventional water baths as it performs simultaneous operations at a time making it ideal to use in pharmaceutical, chemical, food industry as well as environment sector and quality inspection.
Anaerobic Incubator is expertly designed to establish and sustain an oxygen-free environment, which is essential for growing and researching anaerobic microorganisms. Its microcomputer control system allows precise temperature control within the chamber, ranging from room temperature +3 to 60℃. This equipment is customized to guarantee a reliably anaerobic setting, placing equal emphasis on experiment integrity and operator safety.
The Labmate Artificial Climate Incubator represents a cutting-edge, eco-friendly solution ideally suited for an array of scientific endeavors, including cell culturing experiments, plant cultivation, animal husbandry, and diverse environmental research. This versatile incubator boasts an adjustable illumination spectrum and offers a wide range of temperature and humidity settings, meticulously replicating precise climatic conditions conducive to optimal growth. Distinguished by its high-precision temperature control system, this incubator guarantees the uninterrupted maintenance of desired environmental parameters critical for successful experimentation. Its robust construction features non-corrosive stainless steel, guaranteeing long-term durability and reliability, making it a dependable asset for researchers and scientists seeking consistent, controlled environments for their studies.
Labmate CO2 Incubator is specially equipped with air-jacketed and water-jacket insulation technology for consistent environment. It comes with Infrared sensor assisted CO2 controller system which gives user the precise control over CO2 level setting and calibration. The micro-computer temperature controller is well-furnished with over-temperature and temperature timing alarm. It is specifically design with high efficiency air filter for uniform air flow suitable for tissue culture application; development of immunological and stem cells experiments.
Labmate Constant Temperature and Humidity Incubator is a stainless steel chamber formulated to produce exact simulation of varying climatic conditions. The instrument comes with a user-friendly digital LCD interface for easy operation of parameters. It is equipped with micro-computer control system which ensures synchronized regulation of temperature and humidity. The temperature limiting / over temperature alarm system ascertains the equipment safety. It is highly suitable for checking stability and shelf life of the products in pharmaceutical, electronic, automobile and packaging industry and so on.
Labmate Constant Temperature Incubator is an advanced equipment with electro-thermal heating system which guarantees speedy heating. The design offers inner glass door for uninterrupted observation while maintaining a constant internal temperature. The fully sealed magnetic door ensure good insulation. Mirror stainless steel built gives the incubator excellent corrosion resistance. It is essentially suitable for biological or chemical reactions in universities or research laboratory; or artificial hatching of eggs.
Cooling Incubator
Labmate offers a wide range of cooling incubators with different temperature requirements, making them ideal for preserving culture mediums, serums, medicines, microorganism cultivation, and environmental testing applications, among others. Our cooling incubators encompass a temperature range spanning from -10°C to -75°C, providing options with capacities ranging from 175 liters to 1000 liters, and a time range of 0 to 99 hours and 59 minutes. These incubators feature a double-door design for improved functionality, an auxiliary thermostat to enhance temperature control, and a convenient LCD screen for user-friendly operation. Additionally, the external printer facilitates real-time data recording, making Labmate cooling incubators a comprehensive and reliable solution for various scientific and laboratory needs.
Electric Heating Incubator
Labmate Electric Heating Incubator is designed for precision heating and temperature control. These are microprocessor-controlled units and maintain uniform heat distribution with high-quality insulation. Our incubator features variable capacities with adjustable shelving to accommodate a wide variety of samples. They are integrated with a user-friendly interface for monitoring various parameters. These incubator supports a wide range of temperature ranges and ensure optimal results.
Illumination Incubator
Labmate Illumination Incubator is a special-purpose thermostat and humidistat equipment which simulate natural light condition. With high performance temperature control system, an uninterrupted climatic condition can be sustained. The full-spectrum light source ensures accurate light support for growth requirement. The instrument is equipped with security sensors making it safe and stable. It is highly applicable to plant growth experiments, seed germination, breeding experiments or microbial cultivation.
Microbiological Incubator
Labmate Microbiological Incubator is an environment-friendly equipment designed to maintain a steady condition for the growth of biological sample. With high precision micro-computer control system, a uniform temperature setting can be maintained. The large hollow design of glass window and lighting system enables real time observation. Unique stainless steel circular duct ensures uniform air circulation. It is an ideal equipment for testing microbiological experiments, pharmaceutical inspection, tissue culture experiment, or BOD estimation for water testing.
Microplate Shaker Incubator
Our Microplate Shaker Incubator is designed to deliver precise temperature control and maintain consistent experimental conditions. These incubators offer variable shaking speeds promoting the homogeneity and integrity of the samples. Our incubators feature uniform heating across microplates ensuring reliable results. They are compatible with standard microplate formats and seamlessly integrate into existing laboratory workflows.
Mini Dry Bath Incubator
Labmate Mini Dry Bath Incubators include a range of heating and cooling incubators. The device comes with a microprocessor controller providing high precision of temperature control. The instrument has an advantage over conventional water baths as it performs simultaneous operations at a time making it ideal to use in pharmaceutical, chemical, food industry as well as environment sector and quality inspection.
Mould Incubator
Labmate Mould Incubator is specifically designed for accelerated reproduction of mould, pharmaceutical inspection, bacterial cultivation, or water testing analysis. It is equipped with micro-computer controller plus an alarm system. A unique circular air duct assures uniform air circulation. The noise-less fluorine free refrigerant system meets environment-friendly aspects. Intuitive user-friendly display for temperature control function makes it reliable.
Platelet Agitator Incubator
Labmate Platelet Agitator Incubator is well-equipped with advanced agitator to preserve each platelet units during storage. It is furnished with reliable temperature control system with agitator mechanism ensuring consistent condition with effortless agitation. A forced air convection ensures homogenous air circulation through perforated agitator trays. It comes with a high grade alarm system to protect the instrument. The equipment can be used by blood bank units, medical industry, hospitals, pharmaceutical industry and so on.
Platelet Incubator
Platelet incubators are meticulously engineered systems that seamlessly integrate microprocessor technology to ensure a consistently stable temperature environment, specifically tailored for the storage of vital platelet concentrates. These sophisticated units employ forced air circulation mechanisms, which serve to distribute and maintain a uniform temperature across the entire incubator. By harnessing the power of microprocessors, platelet incubators achieve unparalleled precision and reliability in temperature control, thereby safeguarding the integrity of stored platelet concentrates. This advanced technology not only helps to prevent temperature fluctuations but also guarantees optimal conditions for the safe preservation of these critical medical resources. In essence, platelet incubators represent a pinnacle of temperature control innovation, assuring healthcare professionals of a meticulously maintained environment essential for the preservation of platelet concentrates, critical for numerous medical procedures and treatments.
Shaking Incubator
Labmate Shaking Incubator is an innovative instrument which provides a controlled environment for continuous growth condition. It provides stable shaking movement for long-term operation with an adjustable speed range. The shaking platform comes with various sizes which provides different volume capacity. It is well-equipped with accurate temperature control system and speed regulation for persistent operation. The independent alarm system ensures equipment safety. It widely applicable in research industry for microbiological experiment, fermentation industry, pharmaceutical industry and so on.
Water Jacketed Incubator
Labmate Water Jacketed Incubator is an advanced equipment designed with water-jacket heating technology. It has ability to sustain consistent temperature even after power-off. The Micro-computer PID control system provides automatic alarm system for temperature and water level. It comes with LCD screen digital interface for easy operation of parameters. The chamber is made of stainless steel posing corrosion resistance. It is widely applicable in cell culturing experiments, or medical industry, fermentation industry, and so on.
