Close

Enquiry Form

Close

Ask An Expert

Karl Fisher Titrator LMKT-302

Karl Fisher Titrator LMKT-302

Karl Fisher Titrator LMKT-302 is an advanced instrument that determines the water content down to 1% of any solution using volumetric analysis. It provides safety in handling chemicals by auto-filling, removal, and mixing the reagents. The volumetric range which is offered is between 0.1 mg to 250 mg with high accuracy of 0.1 mg. It comprises titer detection mode and KF titration mode for various solvents and also the Karl Fischer reagent reacts quantitatively and selectively with water to measure moisture content in it.

Get Quote
Volumetric Titration Range 0.1 mg to 250 mg
Volumetric Titration Polarization Current Accuracy 0.1 mg
Volumetric Titration Working Current 1 μA ±0.2 μA and 50 μA ±10 μA
Volumetric Titration Repeatability ±0.5 %
Power supply AC 220 V ±22 V (50±1 Hz)
Dimension 340×400×400 mm
Weight 10 kg

point.png The LCD display is present that offers clear visible measured values to note down the data

point.png Titer detection mode and KF titration mode is provided for various solvents

point.png Auto filling, auto-mixing, and auto removal of reagent is done to maintain and safeguard the Karl Fisher chemicals

point.png Units can be selected according to choice such as mg, mg/L, %, ppm, etc.

point.png Adjustable parameters for the desired results can be done such as measurement unit, polarization current, stirring rate, titration rate, stop volume, endpoint potential, stop criterion and etc.

point.png Auto-reset option that changes after the process to default factory reset option provides a new start for the next procedure

point.png The data can be stored up to 200 sets of titration result

point.png Data can be easily transferred to the printer through RS-232 communication interface

10 ml burette


Volumetric titration cell

Karl Fischer titration is widely used for direct analysis of water content in various industries, as a reliable and healthy method. In food industry it is used for water content determination in fruit juices, honey where as it is needed in petroleum industry to check the water content in different oils, also in cosmetic industry for determination of water in the products. It is required in pharmaceutic industry for raw materials, active substances, lyophilized substrates, tablets, ointments, oils.

Get Quote for
Karl Fisher Titrator LMKT-302