Constant Temperature And Humidity Incubator LMTH-F100 Catalog

Overview

Constant Temperature And Humidity Incubator LMTH-F100 is compact 50L stainless-steel incubator. Features 7-inch touchscreen PID controller ensuring uniform, stable conditions for calibration and reliability testing. Comes with LED viewing window and efficient air circulation ensures consistent performance. Equipped with eco-friendly R-449A refrigerant, automatic water supply, and multiple safety protections. Our Incubator is ideal for calibration, stability, and material testing applications.

Features :

CFC-free refrigeration

Real-time data logging

Fast heating/cooling

Uniform air circulation

Compact body design

Precise humidity control

Specifications :

Capacity	50L
Temperature	-35 to +150℃
Temperature Uniformity	±1.5K
Temperature Accuracy	±0.01℃
Temperature Fluctuation	±0.7K
Temperature Deviation	≦±2.0℃
Heat-up Time	–35°C to +150°C, ≥5K/min (no load)
Humidity Range	10%RH to 95%RH
Humidity Deviation	±5.0%RH
Humidity Fluctuation	±2.5%RH
Typical Operating Conditions	Minimum humidity of approximately 15% R.H. at 30°C; relative humidity of 20%R.H. at 25°C
Inner Wall Material	Matte SUS #304 Stainless Steel
Outer Wall Material	Powder Coated Carbon Steel Plates
Insulation Material	Fibreglass (Fire Class A),
Insulation thickness	100 mm
Cable Access Port	one test port with a diameter of Ø50mm on each side(left and right), each equipped with a rubber isolation plug.
Viewing Window with LED Light (W × H)	210 × 270 mm
Sensor	PT100
Refrigerant	R449A
DAQ	connect to a computer for curve display
Communication Interface	RS485
U Disk Storage Card	1G to 8G disk for history curve and data download
Software Operating Environment	Windows XP, Windows 7 or Windows 8 Operating System
Workspace Dimensions (W × D × H)	450 × 400 × 300 mm
Exterior Dimensions (W × D × H)	700 × 1570 × 800 mm
Power Supply	230V 50Hz

Applications :

Constant Temperature and Humidity Incubator LMTH-F100 is ideal for thermometer and hygrometer calibration, ensuring precise environmental conditions for accuracy verification. It is widely used in pharmaceutical stability testing, material and component evaluation, and environmental simulation experiments.