Overview

Labmate ATP Luminometer LMAHM-A100 detects ATP from surface swab samples through bioluminescence, with a 0 to 999,999 RLU detection range and results within 15 seconds. Detection sensitivity down to 1 × 10⁻¹⁸ mol ATP identifies low residual contamination, while settable upper and lower thresholds give automatic pass/fail evaluation. As a handheld hygiene monitoring system, the luminometer supports on-site sanitation verification and contamination control.

Features :

Detection System
Bioluminescence ATP detection

Test Capability
ATP, ALP and milk allergen testing

Measurement Performance
High-sensitivity RLU measurement

Result Evaluation
Automatic pass/fail judgement

Calibration System
Self-calibrating light source

Data Management
PC data transfer via USB

Specifications :

Detection Principle	Firefly luciferase–luciferin bioluminescence
Detection Sensitivity	1 × 10⁻¹⁵ to 1 × 10⁻¹⁸ mol ATP
Detection Range	0–999,999 RLU
Detection Mode	RLU
Testing Time	15 s
Deviation	±5% or ±5 RLU
ATP Recovery Rate	90–110%
Pass/Fail Evaluation	Settable upper and lower limits with automatic pass/fail judgement
Calibration	Built-in self-calibrating light source
Self-Check	Automatic self-check 30 s after start-up
Display	3.5-inch graphic touch screen
Processor	32-bit data processing chip
Data Transfer	Mini USB interface for uploading results to a PC
Software	Data analysis software on USB drive
Battery	3.7 V, 3000 mAh lithium battery
Standby Time	6 months (at 20°C)
Operating Temperature	5–40°C
Operating Humidity	20–85%
Product Dimensions (W × H × D)	188 × 77 × 37 mm
Packaging Dimensions	400 x 300 x 200 cm
Net weight	400 g
Gross Weight	3 kg

Standard Accessories :

• Aluminium alloy carrying case
• USB drive
• PC data cable
• Data analysis software
• Operation manual

Applications :

Applications: Food Processing | Healthcare Facilities | Water Treatment

Functions: Surface hygiene verification | Cleaning validation | Contamination screening