Horizontal Autoclave LMHA-A401 – Front-Loading Steam Sterilization System

What is LMHA-A401?

LMHA-A401 is a horizontal front-loading steam autoclave used for sterilizing laboratory and clinical materials using controlled temperature (105°C–134°C) and pressure cycles. It supports sterilization of instruments, glassware, liquids, textiles, and biohazard waste while aligning with ISO 17665 and GLP practices.

Quick Answer Summary 

• Type: Horizontal steam autoclave

• Loading: Front-loading

• Temperature Range: 105°C – 134°C

• Applications: Instruments, liquids, textiles, glassware

• Industries: Pharma, healthcare, laboratories

• Compliance: ISO 17665, GLP

What is LMHA-A401 Used For?

LMHA-A401 is used to sterilize:

• Surgical and laboratory instruments

• Borosilicate glassware

• Culture media and reagents

• Wrapped instrument trays

• Cleanroom garments

• Laboratory biohazard waste

It supports contamination control and sterile processing workflows in regulated environments.

How Does LMHA-A401 Work?

1. Materials are loaded into horizontal chamber

2. Door is sealed using safety interlocks

3. Air is removed via gravity or vacuum

4. Steam enters and reaches set temperature

5. Load is held for defined exposure time

6. Controlled depressurization occurs

7. Drying phase completes the cycle

Key Features at a Glance

• Microprocessor-controlled sterilization cycles

• Adjustable temperature and exposure time

• Horizontal stainless steel chamber

• Real-time monitoring of pressure and temperature

• Automatic steam and exhaust control

• Integrated safety interlocks

Can LMHA-A401 Sterilize Liquids and Wrapped Materials?

Yes. Labmate system supports sterilization of:

• Liquid media using controlled heating cycles

• Wrapped and porous materials through steam penetration

Is LMHA-A401 Suitable for Hospitals and Laboratories?

Yes. It is used in:

• Hospital sterile processing departments (CSPD)

• Pharmaceutical laboratories

• Research institutions

• Diagnostic laboratories

When Should You Choose LMHA-A401?

Choose this model if:

• You need high-capacity sterilization

• You process mixed loads (liquids + solids)

• You require documented sterilization cycles

• You handle wrapped or porous materials

• You need front-loading workflow efficiency

When This Autoclave May Not Be Suitable

• Low-volume sterilization needs → use benchtop autoclave

• Space constraints → consider vertical autoclave

• Heat-sensitive materials → use alternative sterilization methods

Horizontal vs Vertical Autoclave 

• Horizontal autoclave: Suitable for large batch sterilization and organized loading

• Vertical autoclave: Suitable for compact spaces and smaller loads

Technical Specifications

• Temperature Range: 105°C – 134°C

• Pressure Range: 0.1 – 0.25 MPa

• Chamber: Horizontal stainless steel

• Control System: Digital microprocessor

• Power Supply: 220 V AC, 50/60 Hz

Frequently Asked Questions 

Q1. What is LMHA-A401 used for?

       It is used for steam sterilization of laboratory instruments, glassware, liquids, textiles, and biohazard waste.

Q2. Can it sterilize liquid media?

      Yes, it supports liquid sterilization using programmable cycles.

Q3. What temperature does it operate at?

      It operates between 105°C and 134°C depending on the cycle.

Q4. Is it suitable for hospital use?

      Yes, it supports hospital sterile processing workflows.

Q5. How are parameters monitored?

       Temperature, pressure, and time are displayed digitally in real time.

Q6. Does it support compliance requirements?

       Yes, it aligns with ISO 17665 and GLP documentation practices.

Typical Applications

• Sterilization of surgical instruments

• Laboratory media preparation

• Glassware sterilization

• Biohazard waste decontamination

• Textile sterilization

Compliance Alignment

• ISO 17665 – Steam sterilization standards

• Good Laboratory Practice (GLP)

• Clinical sterilization protocols

Executive Summary