Labmate Horizontal Autoclave LMHA-A400

Horizontal Autoclave LMHA-A400

What is LMHA-A400? LMHA-A400 is a horizontal front-loading steam autoclave used for sterilizing laboratory and clinical materials such as instruments, glassware, culture media, textiles, and wrapped loads. It uses controlled steam cycles between 105°C and 134°C to remove microbial contamination in laboratory environments.

What is a Horizontal Autoclave Used For?

A horizontal autoclave is used to sterilize laboratory and hospital materials using pressurized steam. It is commonly used for:

Surgical instrument sterilization
Glassware decontamination
Culture media preparation
Biohazard waste treatment
Textile sterilization

How does LMHA-A400 work?

Sterilization occurs in the following steps:

Load materials into the horizontal chamber
Seal the door using interlock safety system
Remove air using gravity or vacuum method
Inject saturated steam at selected temperature
Maintain exposure time for sterilization
Release pressure and dry materials
Display cycle data on digital panel

What temperature is required for sterilization?

Autoclaves typically operate between 121°C and 134°C. At 121°C, sterilization takes longer, while 134°C is used for rapid sterilization cycles.

Product Snapshot

Parameter	Specification
Model	LMHA-A400
Type	Horizontal Steam Autoclave
Loading Type	Front Loading
Sterilization Temperature Range	105°C – 134°C
Chamber Orientation	Horizontal
Sterilization Method	Saturated Steam under Pressure
Control System	Digital Microprocessor Control
Display	Digital Display Panel
Capacity	Large Capacity (High-Volume Loads)
Safety Features	Door Interlock, Pressure Protection, Emergency Stop
Applications	Labs, Hospitals, Pharma, Research Centers
Compliance	ISO 17665, GLP Guidelines

Where is LMHA-A400 used?

LMHA-A400 is used in:

Pharmaceutical manufacturing labs
Biotechnology research centers
Hospital sterilization departments (CSPD)
Academic laboratories
Clinical diagnostic labs

How to choose LMHA-A400? Choose LMHA-A400 when:

High-volume sterilization is required
Large batch processing is needed
Digital cycle documentation is mandatory
Horizontal loading improves workflow efficiency

Safety Features

LMHA-A400 includes:

Door interlock system
Pressure monitoring protection
Controlled exhaust release
Emergency stop function

What cannot be sterilized in an autoclave?

Do not sterilize:

Flammable materials
Corrosive chemicals
Heat-sensitive plastics
Volatile liquids

Comparison Insight

LMHA-A400 is suitable for high-capacity sterilization, while LMHA-A200 is more suitable for medium laboratory loads. Pass-through autoclaves are preferred in cleanroom environments where contamination control between zones is required.

Compliance Standards Explained

ISO 17665: Standard for sterilization validation in healthcare products
GLP: Laboratory documentation and procedural compliance framework

Frequently Asked Questions

Q1. What is autoclave sterilization used for?

Autoclave sterilization is used to destroy bacteria, viruses, and spores using high-pressure steam.

Q2. How long does sterilization take?

Typical cycles range from 20 to 60 minutes depending on load type.

Q3. Can liquids be sterilized?

Yes, liquids such as culture media can be sterilized using controlled heating cycles.

Typical Applications

Surgical instrument sterilization
Media preparation
Glassware cleaning
Waste decontamination
Textile sterilization

Quick Summary

LMHA-A400 is a horizontal front-loading autoclave that uses programmable steam cycles (105–134°C) for sterilizing laboratory instruments, glassware, media, and textiles with controlled pressure, digital monitoring, and compliance with ISO 17665 standards.