Get Quote
Contact us now to receive a detailed quotation.
LMHA-A302 is a horizontal front-loading steam sterilizer used in laboratories, hospitals, and pharmaceutical environments. It sterilizes instruments, glassware, media, textiles, and wrapped materials using controlled steam under high temperature and pressure conditions. It is used where validated sterilization cycles and batch processing are required.
A horizontal autoclave is used for sterilizing laboratory and clinical materials using saturated steam under controlled conditions. It is commonly used for:
Surgical instruments
Glassware and laboratory flasks
Culture media and reagents
Wrapped sterile packs
Textiles and protective garments
Biohazard laboratory waste
It is used when repeatable sterilization cycles are required in controlled environments.
Step 1: Loading
Materials are placed inside the horizontal stainless steel chamber.
Step 2: Door sealing
The chamber door is locked using mechanical and electronic interlocks.
Step 3: Air removal
Air is removed using gravity displacement or vacuum-assisted pre-conditioning.
Step 4: Steam injection
Saturated steam is introduced into the chamber.
Step 5: Sterilization phase
Materials are exposed to controlled temperature and pressure for a set duration.
Step 6: Cooling & drying
Pressure is released and drying prepares items for safe removal.
LMHA-A302 is used in:
Pharmaceutical manufacturing labs
Biotechnology research centers
Hospital sterilization departments (CSPD)
Clinical diagnostic laboratories
Academic research institutions
Food testing laboratories
It is used where high-capacity sterilization of mixed laboratory loads is required.
LMHA-A302 is used because it enables controlled steam sterilization that reduces microbial contamination in laboratory materials. It supports repeated sterilization cycles required in pharmaceutical and clinical workflows.
It is also used where documentation of sterilization cycles is required for compliance systems.
LMHA-A302 can sterilize:
Metal instruments
Glass containers
Liquid media
Wrapped surgical packs
Textiles and garments
Laboratory waste materials
Heat-sensitive and flammable materials are not suitable.
Temperature Range: 105°C – 134°C (sterilization operating range)
Pressure Range: 0.1 – 0.25 MPa (steam saturation control)
Chamber Type: Horizontal stainless steel chamber
Control System: Digital microprocessor-based system
Power Supply: 220V AC, 50/60 Hz
Loading Type: Front-loading batch sterilization
Programmable sterilization cycles
Real-time temperature and pressure monitoring
Door interlock safety system
Controlled steam flow and exhaust system
Digital cycle display
Stainless steel chamber structure
This model is suitable when:
Large sterilization batches are required
Mixed loads are processed regularly
Structured horizontal loading is preferred
Audit documentation is required
High cycle repeatability is needed
Compared to vertical autoclaves, LMHA-A302 supports higher batch organization and better load separation. Compared to benchtop systems, it is used for larger sterilization requirements. Compared to pass-through systems, it is used in non-cleanroom batch workflows.
Q1. What is LMHA-A302 used for?
It is used for steam sterilization of laboratory instruments, glassware, media, textiles, and clinical materials.
Q2. What is its temperature range?
It operates between 105°C and 134°C depending on cycle settings.
Q3. Can liquids be sterilized?
Yes, liquid media and reagents can be sterilized using controlled cycles.
Q4. Is it used in hospitals?
Yes, it is used in hospital sterilization departments and CSPD units.
Q5. Does it support cycle logging?
Yes, it supports digital monitoring and cycle recording.
Surgical instrument sterilization
Media preparation in laboratories
Glassware sterilization
Waste decontamination
Textile sterilization in clean environments
LMHA-A302 supports sterilization workflows aligned with:
ISO 17665 sterilization standard
Good Laboratory Practice (GLP)
Hospital sterilization protocols
Laboratory documentation systems