Get Quote
Contact us now to receive a detailed quotation.
LMHA-A103 is a horizontal, front-loading steam autoclave used to sterilize laboratory instruments, glassware, textiles, media, and consumables using saturated steam at 105°C–134°C under controlled pressure conditions.
It is designed for laboratory, hospital, and pharmaceutical sterilization workflows requiring documented and repeatable sterilization cycles.
A horizontal autoclave sterilizes materials using high-pressure steam that destroys microorganisms, spores, and biological contaminants. The horizontal chamber allows bulk loading and uniform steam distribution across all items.
LMHA-A103 is used for sterilizing:
Laboratory instruments
Glassware
Culture media and reagents
Wrapped surgical tools
Cleanroom textiles
Biohazard waste
It is used in:
Pharmaceutical manufacturing labs
Biotechnology research centers
Hospital sterile processing departments
Academic laboratories
Clinical diagnostic facilities
Food testing laboratories
Load materials into horizontal chamber
Seal door using safety interlocks
Remove air via gravity or vacuum method
Inject saturated steam at set temperature
Maintain sterilization phase (exposure time)
Controlled cooling and depressurization
Safe unloading after cycle completion
LMHA-A103 operates between 105°C and 134°C, depending on the selected sterilization program and load type.
Yes. It supports liquid sterilization using controlled exhaust cycles that prevent boiling over of culture media and reagent containers.
Digital microprocessor control system
Programmable sterilization cycles
Horizontal stainless steel chamber
Real-time temperature and pressure display
Automatic steam control system
Door interlock safety system
LMHA-A103 includes:
Door locking during active cycles
Overpressure protection system
Automatic shutdown in abnormal conditions
Real-time monitoring sensors
Use LMHA-A103 when:
Medium sterilization volume is required
Front-loading chamber improves workflow
Digital cycle recording is required
ISO or GLP compliance is mandatory
Mixed loads (instruments + liquids) are processed
Horizontal autoclave: High-volume, front-loading, better for batch processing
Vertical autoclave: Compact, top-loading, suited for small labs
Do not sterilize:
Flammable substances
Volatile chemicals
Heat-sensitive plastics
Sealed containers without venting
Electronic components
Surgical instrument sterilization
Media preparation in biotech labs
Glassware decontamination
Cleanroom textile sterilization
Laboratory waste treatment
LMHA-A103 supports:
ISO 17665 sterilization validation
Good Laboratory Practice (GLP)
Clinical sterilization protocols
Internal QA documentation systems
Cycle time typically ranges from 20 to 60 minutes depending on load type.
It operates at 0.1–0.25 MPa during sterilization cycles.
Yes, controlled cycles can disinfect laboratory waste before disposal.
Yes, it is widely used in pharmaceutical production and QC labs.
Yes, cycle data can be recorded for validation and audit purposes.
Yes, trained personnel should operate the system for safety and compliance.
LMHA-A103 is optimized for medium-capacity laboratory sterilization with structured horizontal loading, programmable cycles, and real-time monitoring. It supports higher throughput compared to vertical autoclaves while maintaining controlled sterilization conditions.