Spectrometer LMICP-A201 is intended for measuring major, minor, and trace elements in a variety of samples. It has an advanced optical design that includes a fully illuminated holographic grating with special interference correction and a monochromator with a diameter of 1000 mm. The instrument has a wavelength range of 195 to 800 nm and a testing speed of 5 to 8 elements per minute, making it suitable for sample content ranging from 0.01 ppm to several thousand ppm units. Incorporated with three concentric quartz torch rubs of ED 35 mm and a double-pass Scott spray chamber, the device is ideal for wide sample analysis.
Get QuoteMonochromator Optical Type | Czerny Turner |
Monochromator Resolution |
≤ 0.015 nm (3600-line grating) ≤ 0.030 nm (2400-line grating) |
Monochromator Focal Length | 1000 mm |
Grating Specification | Huge Holographic grafting with 3600 L/ mil or 2400 L/mil and 800 mm × 100 mm of ruling area |
Monochromator Wavelength Range |
195 to 500 nm for 3600-line grating 195 to 800 nm for 2400-line grating |
Solid State Power Frequency | 27.12 MHz |
Solid State Stability | < 0.05 % |
Solid State Output Power | 800 W – 1600 W, continuously adjustable with power efficiency more than 65 % |
Solid State Power Stability | ≤ 0.05 % |
Solid State Spray Chamber | Scott double pass spray chamber |
Solid State Induction Coil | ID 25 mm × 3, equipped with three concentric quartz torch tubes of ED 35 mm |
Suitable Sample Content Range | Liquid Sample 0.01 ppm – several thousand ppm, Solid or Powder Sample 0.001 % - 70% |
Repeatability | Short-term stability, RSD ≤ 1.5 %, Long-term stability, RSD ≤ 2 % |
Test Speed | 5 – 8 elements / min |
Limits of Detection (LOD, mg / L) | 1 ppb – 10 ppb |
Circuit Photomultiplier Tube | R212 / R928 |
Circuit Negative High Voltage | (-50 to -1000) V |
Circuit Measuring Range | 10-12 to 10-4 |
Signal Acquisition | VF conversion |
Storage and Transportation Temperature Range | 15℃ to 25℃ |
Humidity | ≤ 70 % |
Power Supply | 220 ± 10 V, 50 – 60 Hz |
Dimensions (L × W × H) | 1500 × 800 × 800 mm |
It is easy-to-use, simple, reliable, and highly efficient
Software controlled flow of carrier gas, plasma gas and auxiliary gas
Wide wavelength range
Auto sampler greatly improves efficiency
Highly stability of flux
One-button plasma ignition
Lower gas consumption, excellent detection limits
Scott double-pass spray
Czery turner optical system
3 concentric quartz torch tubes
ICP Spectrometers are widely used for sample analysis in the fields of geology, metallurgy, chemistry, environmental protection, foods, biological samples, criminal science, agricultural research, etc.
Get Quote for
ICP Spectrometer LMICP-A201
Related Products