Quick Login


Enquiry Form


Ask An Expert

Benchtop Conductivity Meter LMCMB-405

Benchtop Conductivity Meter LMCMB-405

Benchtop Conductivity Meter LMCMB-405 is a touch screen device to measures the electrical conductivity along with the TDS, salinity and resistivity of any aqueous solution subjected to it. The electrical charge is measured by the conductivity meter between the ranges of 0.00 μS/cm to 3000 mS/cm which gives exact result with different operation modes simultaneously. The substances dissolved in the water determines how conductive the solution will be. As the number of dissolved ions increases alongside the temperature, the meter measures precisely the result and presents it on the LCD.

Get Quote
Conductivity Range 0.000 μS/cm to 3000 mS/cm
Conductivity Resolution 0.001 μS/cm
Conductivity Accuracy ±0.5 % FS
Resistivity Range 5.00 Ω.cm to 100 MΩ.cm
Resistivity Resolution 0.01 Ω.cm
Resistivity Accuracy ±0.5 % FS
TDS Range 0.000 mg/L to 100g/L
TDS Resolution 0.001 mg/L
TDS Accuracy ±0.5 % FS
Salinity Range 0.00 to 8.00 %
Salinity Resolution 0.0001
Salinity Accuracy ±0.1 %
Temperature Range -5.0 to 130.0 ℃
Temperature Resolution 0.1 ℃
Temperature Accuracy ±0.1 ℃
Power Supply 100 V to 240V (50/60 Hz)
Dimension 280×280×130 mm
Weight 2.5 kg

point.png 7-inch touch screen LCD with backlight provides clear and visible results

point.png There is a user guidance system for easy equipment operation

point.png Delivery data capacity up to 1000 sets Standard solution identification of various samples and calibration with 1 to 5 points

point.png It consists of more than 20 configurable parameters, with calibration points, stability standards and temperature units

point.png Data can be searched, viewed and compared through the data management function, and the results can be counted

point.png The parameters that can be set are battery constant, temperature compensation coefficient and TDS factor

point.png With multiple reading functions, allowing the reader to read automatically, regularly and continuously

point.png It has an automatic hold function, which can sense and lock the measurement endpoint

point.png Provide automatic temperature compensation to ensure accurate results

point.png Data can be transmitted to PC or printer via USB or RS-232 communication

Conductivity Cell (k=1)

Electrode Holder
ATC probe

The conductivity meter can be used in hydroponic and aquaculture settings to measure the concentration water whether it is accurate or not. In addition, it is used in agriculture to measure the salinity levels of surface water and soil samples and also measure the quality of water in a wastewater treatment facility. The salt concentration for drinking water and purity of water is checked at industries such as irrigation department and food and beverages.

Get Quote for
Benchtop Conductivity Meter LMCMB-405