LiveZilla Live Help
Spectrophotometer


Atomic Absorption Spectrophotometer AAS-004

    Features:
    • Innovated flame analysis technique.
    • The patented flame analysis technique adopting oxygen rich air acetylene flame as the substitution for nitrous oxide-acetylene flame for high temperature element analysis, such as Ca, Al, Ba, W, Mo, Ti, V, etc. Flame temperature is continuously adjusted between 2300-2950°C,which makes it possible to choose the best atomization temperature for different elements.
    • It features easy operation, low analysis cost.
    • Accurate automatic operation.
    • 6-lamp turret automatic changeover, automatic adjustment of the lamp supply power, automatic optimize spectral beam position.
    • Automatic wavelength scanning and peaking.
    • Automatic spectral bandwidth selection.
    • Automatic igniting.
    • Perfect safety protection measures: Alarm and automatic safety protection to fuel gas leakage, air pressure deficiency and abnormal flame extinction.
    • Adopting large-scale programmable logic array and inter IC bus technology with advanced electronic design.
    • AMP adapters with high reliability to ensure long term reliability of the whole electric system.
 

 Technical Specification:

Model No: AAS-004

Atomic Absorption Spectrophotometers– LAAS 110B

 

Main Specification

Wavelength Range

190-900nm

Wavelength Accuracy

±0.5nm

Resolution

better than 0.3nm

Baseline Stability

0.005A/30min

Background Correction

The D2 lamp background correction capability at 1A is better than 30 times. The S-H background correction capability at 1.8A is better than 30 times

Hollow Cathode Lamps

Lamp Turret

6-lamp turret automatic changeover

Lamp Current Adjustment

Automatic adjustment and display.Wide pulse current: 0~25mA, Narrow pulse current: 0~10mA.

Lamp Power Supply mode

Powered by two pulses: 400Hz wide pulse and 100Hz narrow pulse simultaneously

Optical System

Monochromator

Single beam, Czerny-Turner design grating monochromator

Grating

1800 l/mm

Focal Length

277mm

Blazed Wavelength

250nm

Spectral Bandwidth

0.1nm, 0.2nm, 0.4nm, 1.2nm

Detection and Data Processing System

Detector

Photomultiplier with high sensitivity and wide spectral range

Software

Ms-WindowsTM operating system

Analytical Method

Working Curve Method (1st order and 2nd order fitting), Standard addition method

Repeatable Measurement

Maximum 20 times of repeat measurement, automatic calculation of mean value, standard deviation and relative standard deviation

Condition Reading

With model function

Result Printing

Measurement of data and final analytical report printout

Flame Analysis

Burner

10cm single slot all titanium burner for Air-C2H2flame; 5cm single slot all titanium burner for oxygen rich flame

Spray Chamber

All plastic spray chamber

Nebulizer

High efficiency glass nebulizer with metal sleeve

Position Adjustment

Adjusting mechanism for vertical, horizontal positions and the rotation angle of the burner

Protection of Gas System

Fuel gas leak protection, abnormal flame extinction alarm, air-pressure deficiency protection and explosion proof device

Flame Ignition

Automatic

Characteristics Concentration and Detection Limit

Normal Air C2H2 Flame

Cu: Characteristic concentration ≤0.05mg/L, Detection limit≤0.006mg/L;

Oxygen Rich Air C2H2Flame

Ba: Characteristic concentration ≤0.22mg/L

Hydride Generation

Hg: detection limit ≤ 0.5μg/L

Dimension (L x W x H) mm

1020x490x540

Weight

Unpacked 80kg