Labmate Dry Bath Incubator LMDR-B102 is a replacement of the traditional dry bath incubators. It is a microprocessor controlled device with a meticulousness of temperature control and sample preparation parallelism. It has an accurate temperature control with high stability, low power consumption and a large LCD display.
Get Quote| Temp. Control Range | RT+5℃ ~ 150℃ |
| Heating time | ≤ 30 min(from 20 ℃ to 150 ℃) |
| Temperature Control accuracy@100°C | ≤ ±0.5℃ |
| Block temp difference@40℃ | 0.3℃ |
| Block temperature Uniformity | ≤ ±0.5℃ |
| Display Accuracy | 0.1℃ |
| Timing Range | 99h59min |
| Maximum Temperature | 150℃ |
| Maximum power | 200W |
| Power Supply | 100-230V 50/60Hz |
| Dimension | 230x220x95mm |
Large LCD display
Simultaneous display of set temperature and time diminishing
In built temperature calibration
In built over temperature protection
Programmed diagnostics monitoring
Safe and reliable use
Uniform heating
Temperature control with high stability
Lower power consumption
| Model No. | Specification | Maximum Temperature |
| LMDR-BO18 | 96x0.2ml PCR plate | 100°C |
| LMDR-BO19 | 54x0.5ml | 100°C |
| LMDR-BO20 | 35x1.5ml | 100°C |
| LMDR-BO21 | 35x2.0ml | 100°C |
| LMDR-BO22 | 20x0.5ml+15x1.5ml | 100°C |
| LMDR-BO23 | 24xdiameter≤φ12mm | 100°C |
| tubes | ||
| LMDR-BO24 | 32x0.2ml+25x1.5ml | 100°C |
| LMDR-BO25 | 32x0.2ml+10x0.5ml | 100°C |
| +15x1.5ml | ||
| LMDR-BO26 | 103x67x30 | 100°C |
| (Water Bath Block) | ||
| LMDR-BO27 | 96x0.2ml plate | 100°C |
| (flat bottom) |
Get Quote for
Dry Bath Incubator LMDR-B102
Related Products
