Labmate Constant Temperature Incubator LMTI-A100 works on the principle of direct heating of chamber with isolation for a constant temperature for a long period. The body of the equipment is made up of powder coated steel housing to provide rigidity. There are two doors, the inner door made up of high quality glass to maintain the required temperature and for safety. It is provided with a pre-set programmed control with timing range up to 99 hours for power-on, power-off and working.
Get Quote| Chamber volume | 30 L |
| Temp. Control Range | RT＋5°C～65°C |
| Temp. Accuracy | ±0.1°C at 37°C |
| Temp. Fluctuation | ±0.3°C |
| Temp. Uniformity | ±0.5 °C at 37°C |
| Temp. Controller | PID microprocessor control, soft touch |
| Display | LED display |
| Temp. Sensor | PT100 |
| Timer | Power-on, power off and working. Timing range: 1min-99hr |
| Internal Material | 304 stainless steel |
| External Material | Steel (powder coating) |
| Inner Dimensions | 300×300×350 mm |
| Outer Dimensions | 420×390×625 mm |
| Net Weight | 28 kg |
| Power Consumption | ≤155 W |
| Shelf Size | 292×278 mm |
| Shelf Qty(Standard/Maximum) | 2 out of 4 |
| Power Supply | 220V/50Hz (Optional: 220V/60Hz, 110V/60Hz) |
Stainless steel shelves and chambers with round corners
Easy to clean and sterilise
Powder coated steel housing
Double door system for safety
Temperature controller with high-speed, high-performance CPU chip
Reasonable air circulation by fan for uniform chamber temperature
High-sensitivity and high precision Pt resistance sensor
Multiple alarming for sensor failure, high/low temperature deviation, over temperature and high/low water level
Parameter memory
Temperature display calibration
Self-diagnostic control technology
Get Quote for
Constant Temperature Incubator LMTI-A100
